PAM-MK2 Range
The easiest way to determine if your PAM2 is a Dolby unit:
Enter the setup menu
Select setup2 (as below)
Highlighted in red will be the type of Dolby...
Mon, 27 Feb, 2017 at 4:37 PM
Note: A factory reset will remove all presets so make sure to save your presets to a USB drive should you wish to re-upload them after the procedure. To...
Tue, 19 Jan, 2021 at 4:55 PM
The table below shows all the available dip switch functionality of the PAM2-MK2.
Mon, 6 Apr, 2020 at 9:48 AM
Power the PAM1 off and then re-apply power after 30 seconds. Whilst re-applying power, press and hold the Menu and Hotkey 2 buttons.
Tue, 31 Aug, 2021 at 10:14 AM